Choose a rubber lined pipe elbow by matching the conveyed medium with the rubber formulation, elbow geometry, and operating limits. Rubber Lined Elbows suit abrasive slurry, corrosive liquids, dredging, wastewater, power generation, and other industrial pipeline applications.
DN25 to DN2000
Diameter
15°, 30°, 45°, 60°, 90°
Elbow angle
3mm to 15mm
Lining thickness
A rubber lined pipe elbow is suited to pipeline bends exposed to abrasive solids, corrosive liquids, or turbulent flow. Our Rubber Lined Elbows combine a carbon steel or stainless steel outer body with an internal rubber lining, giving the connection a steel-supported structure and a resilient flow surface.
Natural Rubber (NR) is the starting point for abrasion-focused service because its elasticity absorbs the kinetic energy of solid particles. EPDM, Butyl, and Neoprene are available for specific chemical or temperature requirements. Select the formulation from the actual fluid composition and operating temperature, especially when the line carries acids, alkalis, or chemically treated effluents.
Mining and mineral processing lines may carry ores, sand, tailings, or slurry through bends. Chemical plants may handle phosphoric acid or hydrochloric acid. The same elbow family also applies to dredging discharge, wastewater treatment, flue gas desulfurization, bottom ash handling, and abrasive waste disposal. Match the lining to the medium before choosing the geometry.
The product covers DN25 to DN2000, with 15°, 30°, 45°, 60°, and 90° options. Custom radius elbows are available for layouts that need a different bend geometry.
Start with the connected pipe size and route drawing. The elbow angle determines how the component changes direction, while the radius affects the available installation space and flow path. A 90° option suits a full directional change; a smaller angle can fit a more gradual route. Confirm both the required angle and the space around the connection before ordering.
| Parameter | Available options |
|---|---|
| Diameter | DN25 to DN2000 |
| Elbow angle | 15°, 30°, 45°, 60°, 90° |
| Lining thickness | 3mm to 15mm |
| Working pressure | PN10, PN16, PN25, and higher custom ratings |
| Temperature range | –40°C to +100°C, depending on formulation |
Lining thickness is typically 3mm to 15mm and is optimized according to particle size and velocity. For a slurry line, provide those two operating details so the lining thickness can be matched to the wear conditions.
Working pressure options include PN10, PN16, PN25, and higher custom ratings. The temperature range is generally –40°C to +100°C, depending on the rubber formulation. The outer body can be carbon steel, including Q235B or ASTM A106, or stainless steel. Select the body and pressure rating as part of the complete pipeline connection.
The internal rubber surface provides a consistent flow surface that minimizes flow resistance and mineral buildup. Its elasticity also helps reduce vibration and operational noise caused by turbulent flow, a useful property at bends where solid particles change direction.
Mining and mineral processing: Use a rubber lined pipe elbow for tailings discharge, ore slurry transport, or cyclone feed lines where solid particles create wear at the bend. Natural Rubber (NR) is the relevant lining starting point for abrasion-focused service.
Chemical processing: Choose the rubber formulation around the acids, alkalis, or other corrosive fluids in the line. Phosphoric acid and hydrochloric acid are among the listed chemical applications.
Dredging: Specify the discharge route, angle, and solids conditions for lines carrying sand, gravel, or sea mud. These details connect the bend geometry and lining thickness to the service.
Wastewater and power generation: The elbows suit abrasive sludge, chemically treated effluents, flue gas desulfurization systems, and bottom ash handling. Include the pressure, temperature, and medium composition when finalizing the configuration.
What to weigh
Your shortlist
Choose Rubber Lined Elbows for steel-supported pipeline bends exposed to abrasive solids or corrosive liquids. Use NR for abrasion-focused service and select EPDM, Butyl, or Neoprene for specific chemical or temperature requirements. Send the line size, route geometry, medium, particle conditions, pressure, and temperature when requesting a configuration.
Send the connected line size, required angle or radius, conveyed medium, particle size, velocity, operating pressure, and temperature with your inquiry. Include the preferred rubber formulation and outer body material when those choices are already defined by the pipeline design.
Before ordering, compare the selected DN size and angle with the route drawing, then check that the pressure rating, temperature range, formulation, and lining thickness describe the same operating case.
The company
Our Vision For metal products, rubber, and plastic products Customer satisfaction is at the heart of everything we do. We take pride in offering exceptional customer service, including technical consultations, design optimization, and comprehensive after-sales support. At Hebei Qiao Wan, we emphasize quality and innovation at every step. From material selection to manufacturing and final testing, we maintain rigorous quality control measures to ensure that our products meet or exceed international standards.
About Us ↗Visit company website ↗Related Products
Our main products are polyurethane lined pipes, mining equipment fittings and metal hoses.